Level 1 Training – Scanning Mastery (Sardinia, Italy) 🇮🇹

October 29, 2021 @ 9:00 am 5:00 pm

One-day in-person Intraoral Scanning from CAD-Ray Europe Mentor, Dr. Angelo Meloni. This is an introductory level courses that give you and a team member the confidence to scan an arch in under a minute.

Course Objectives:

  1. Introduction to your new Medit Intra-Oral Scanner
    • Overview of your new Medit IOS’s operation and possibilities
    • Appreciate how Medit can work in a typical dental practice
    • Understand when you can use your Medit IOS
    • Comprehend latest generation of scanning technology
    • Learn how to efficiently scan with your new Medit IOS
  2. Scanning Demonstration and Hands-On
    • Become comfortable scanning on a model
    • Appreciate the information that is needed to achieve a high-quality scan
    • Comprehend the difference between good and bad data capture
    • Learn the pitfalls of over-scanning
  3. Live scanning in the mouth
    • Understand how to operate your new IOS intra-orally
    • Learn proper technique and workflow
    • Isolation of lips, tongue and tooth preparations
    • Master the single-unit, multi-unit and full arch digital impression
    • Scanning for special cases: implants, orthodontics, etc.
€500 – €1000 Per Doctor*

* For existing CAD-Ray Customers this Event is FREE of charge.

Instructor: Dr. Angelo Meloni

+39 3299316740

Dr. Angelo Meloni

Via Fondazione Rockefeller, 43
Alghero, Sardinia 07041 Italy
+ Google Map
+39 3299316740

Tickets

The numbers below include tickets for this event already in your cart. Clicking “Get Tickets” will allow you to edit any existing attendee information as well as change ticket quantities.
Tickets are no longer available

Level 1 Training – Scanning Mastery (Valladolid, Spain) 🇪🇸

October 1, 2021 @ 9:00 am 5:00 pm

One-day in-person Intraoral Scanning from CAD-Ray Europe Mentor, Dr. Guillermo Galván. This is an introductory level courses that give you and a team member the confidence to scan an arch in under a minute.

Course Objectives:

  1. Introduction to your new Medit Intra-Oral Scanner
    • Overview of your new Medit IOS’s operation and possibilities
    • Appreciate how Medit can work in a typical dental practice
    • Understand when you can use your Medit IOS
    • Comprehend latest generation of scanning technology
    • Learn how to efficiently scan with your new Medit IOS
  2. Scanning Demonstration and Hands-On
    • Become comfortable scanning on a model
    • Appreciate the information that is needed to achieve a high-quality scan
    • Comprehend the difference between good and bad data capture
    • Learn the pitfalls of over-scanning
  3. Live scanning in the mouth
    • Understand how to operate your new IOS intra-orally
    • Learn proper technique and workflow
    • Isolation of lips, tongue and tooth preparations
    • Master the single-unit, multi-unit and full arch digital impression
    • Scanning for special cases: implants, orthodontics, etc.
€500 – €1000 Per Doctor*

* For existing CAD-Ray Customers this Event is FREE of charge.

Instructor: Dr. Guillermo Galván

+34 983 371 267

Ver la web del organizador

Dr. Guillermo Galván

Calle Acera de Recoletos, 12, 1º A
Valladolid, Valladolid 47004 Spain
+ Google Map

Tickets

The numbers below include tickets for this event already in your cart. Clicking “Get Tickets” will allow you to edit any existing attendee information as well as change ticket quantities.
Tickets are no longer available
Posted on Leave a comment

MEDIT Link > Clinux Integration

24 September 2021

As of today, MEDIT Link has an integration to Clinux by CAD-Ray. The official Clinux plugin can be installed via the Medit Link App Box as usual.

For the MEDIT/Clinux user, it means your scans in MEDIT Link can now be directly opened in Clinux with the click of a button. Previously users had to first export their MEDIT scans to a folder, then open Clinux and import those files for working.

Thanks to the cooperation and partnership between MEDIT and CAD-Ray, the process for making a Crown from your MEDIT scans just got a whole lot easier.

New, Simpler, Faster and Easier Workflow

Clinux integration into MEDIT Link

Once you have installed the Clinux integration into your MEDIT Link software (see below for instructions), you simply take your scans as normal. When you are finished, click on the Clinux icon in the top right of your MEDIT Link Case Box and the scans you just made will be automatically loaded into Clinux, ready for designing your restoration.

When the restoration design is completed, you can export the restoration as an .STL or .OBJ for either printing or milling purposes.

CAD-Ray Grand Opening and Medit Owner Training

July 9, 2021 @ 7:00 am July 10, 2021 @ 3:30 pm

Assuming we can all travel again this summer, CAD-Ray and Medit have joined forces to create our first Medit Owner’s Training Event right here in historic Heidelberg.

Don’t miss your chance to learn from some of the best trainers in dentistry, network with colleagues using Medit plus CAD-Ray and Medit staff.

Please Note: This course will be “live” In-Person when travel regulations allow easy entry/departure from Germany. Otherwise, the event will be streamed online.

Tentative Schedule:

Day 1 – Friday July 9

  • 09:00 AM – Welcome and Introduction
  • 09:15 AM – Introduction to your new Medit Intra-Oral Scanner
    • Overview of your new Medit IOS’s operation and possibilities
    • Appreciate how Medit can work in a typical dental practice
    • Understand when you can use your Medit IOS
    • Comprehend latest generation of scanning technology
    • Learn how to efficiently scan with your new Medit IOS
  • 10:00-10:15 AM – Break
  • 10:15 AM – Scanning Demonstration and Hands-On
    • Become comfortable scanning on a model
    • Appreciate the information that is needed to achieve a high-quality scan
    • Comprehend the difference between good and bad data capture
    • Learn the pitfalls of over-scanning
  • 12:30 PM – Lunch
  • 13:30 PM – Live scanning in the mouth
    • Understand how to operate your new IOS intra-orally
    • Learn proper technique and workflow
    • Isolation of lips, tongue and tooth preparations
    • Master the single-unit, multi-unit and full arch digital impression
    • Scanning for special cases: implants, orthodontics, etc.
  • 16:30-17:30 – Happy Hour (Aperitifs)
  • 18:30 – Group Dinner (location TBD)

Day 2 – Saturday July 10

  • 09:00 AM – Welcome Back and Housekeeping
  • 09:15 AM – Introduction to CAD Software Design
    • Learn about the various CAD softwares available to IOS users
    • Introduction to Clinux cloud-based CAD Software
    • Exercises: Learn scanning for CAD Software design
  • 10:00-10:15 AM – Break
  • 10:15 AM – Designing in Clinux CAD Software
    • Exercises: Learn how to make your own CAD designs
    • Exercises: Learn how to mill your own restorations
    • Exercises: Learn how to finish, stain & glaze your own Crowns
  • 12:30 PM – Lunch
  • 13:30 PM – Advanced Techniques with Medit IOS Scanners (i500 and i700)
    • Learn how to integrate of Cone-beam and .STL data into your workflow
    • Understand the possibilities of digital implant restorations
    • Learn scanning techniques for multi-abutments
    • Learn proper case presentation techniques for patients
  • 16:30 – Happy Hour & Certification (Aperitifs)
  • 17:30 – Course ends

 

Frequently Asked Questions

Q: I bought my camera from CAD-Ray. Can I join the meeting?
A: Yes! Any CAD-Ray owner is welcome to join the Grand Opening and Owner Training event at no charge.

Q: Can I bring my staff?
A: Yes, staff may join at a reduced price (250€)

Q: I am a Medit owner, but I bought my camera/scanner from another dealer. Can I join the meeting?
A: Yes! Any Medit customer is welcome to join the Grand Opening and Owner Training event for 500€.

Q: Who is the instuctor?
A: Dr. Armen Mirzayan, founder of CAD-Ray US, CAD/CAM user since 20 years, international key opinion leader, Medit Master and trainer of more than 15,000 dentists. We will announce additional instructors before the event.

Q: How is the travel situation to Germany?
A: Looking good. Please check the official German Health website before finalizing your plans.

Q: Where is the venue?
A: The event will be hosted at a 4+ star hotel in Heidelberg (to be announced soon)

Q: Can I bring my family?
A: Yes! Heidelberg is a fantastic town with lots to see. They will not get bored while you are in class. 🙂

Bring the family to Heidelberg!

Detalles

Comienza:
July 9 @ 7:00 am
Finaliza:
July 10 @ 3:30 pm
Precio:
500€
Categoría del Evento:
Etiquetas del Evento:
, , ,

Organizador

CAD-Ray Europe
Teléfono:
+49 6221 416430
Correo electrónico:
sales-europe@cad-ray.com

TBD

Heidelberg, Germany + Google Map